A bench-top, manually operated injection molding machine built for higher-volume production and larger products. The Arbour Injection Machine V2 uses a rack and pinion system to drive molten plastic into your mold by hand, with no compressor or air supply needed. At 38.5 kg with a 160 x 22 x 40 cm footprint, it is designed to be permanently installed: bolted to a bench or floor using the four M8 mounting holes.
With a 155g (175 cm³) shot size and dual 300W heaters (600W total), the Arbour V2 has more than double the capacity of the Injection Mini V2. Dual PID temperature controllers, one for the top of the barrel and one for the bottom, give precise heat control across the full barrel length. Rated output is 1.12 kg/hr, with up to 7 full cycles per hour at maximum shot size.
Designed to work with the full SDS Premium Molds range and compatible with custom aluminium and steel molds via the quick-change mold system.
Key Features
- 155g shot capacity: more than double the Injection Mini V2, suitable for larger products and higher production volumes.
- No compressor needed: manual rack and pinion injection, no air supply required.
- Dual 300W heaters (600W total): faster, more even heating across the full length of the larger barrel.
- 125 bar injection pressure: reliable filling of detailed and deep-cavity molds.
- Dual PID temperature controllers: independent top and bottom control for precise, consistent melt temperatures.
- Quick-change mold system: fast mold changeover without tools.
- Up to 7 cycles per hour: rated output of 1.12 kg/hr at maximum 155g shot size.
- Dual voltage: runs on 110–120V or 220–240V. Your country's plug is included.
- Permanent installation: must be bolted to a bench or floor using M8 bolts through the four mounting holes.
- CE and UKCA certified.
Purchase Options
Kit: all parts, hardware, and a step-by-step digital build guide. Build time is longer than the Injection Mini V2. Good for anyone who wants a thorough understanding of the machine, or for educational and workshop settings.
Partially Assembled: core components assembled before shipping. Some build work is still required on arrival, with full assembly instructions included.
Both options include a country-specific plug and ship globally via UPS Carbon Neutral shipping.
Specifications
- Weight: 38.5 kg
- Dimensions: 160 x 22 x 40 cm (H x D x W)
- Shot Volume: 175 cm³ (approx. 155g PP)
- True Barrel Volume: 224 cm³ (approx. 200g PP)
- Injection Method: Manual rack and pinion
- Injection Pressure: 125 bar
- Heater Power: Dual 300W (600W total)
- Max Temperature: 300°C (dual PID controlled)
- Plastic Melt Time: 8 to 12 minutes
- Rated Output: 1.12 kg/hr
- Full Cycles Per Hour: Max 7 (at 155g shot)
- Max Mould Space: 26 x 18 cm (H x W), unlimited depth
- Mould Connection: Quick-change system
- Voltage: 110–120V 60Hz or 220–240V 50Hz (country-specific plug included)
- Plug Types: UK (G), EU (E), US/CA (B), AU/NZ (I)
- Certification: CE and UKCA certified
- Warranty: 12 months from delivery
- Installation: Must be bolted down (M8 bolts, 4 mounting holes)
What's in the Box
- 1x Arbour Injection Machine V2 (Kit or Partially Assembled)
- 1x Digital Build Guide (Kit) or Assembly Guide (Partially Assembled)
- 1x User and Safety Manual
- 1x Country-specific mains plug
Shipping and Support
We ship from the UK to destinations worldwide via UPS Carbon Neutral shipping. For current dispatch times and shipping rates, see our FAQ page. For any other enquiries, visit our Contact page or use the chat box below.
A bench-top, manually operated injection molding machine built for higher-volume production and larger products. The Arbour Injection Machine V2 uses a rack and pinion system to drive molten plastic into your mold by hand, with no compressor or air supply needed. At 38.5 kg with a 160 x 22 x 40 cm footprint, it is designed to be permanently installed: bolted to a bench or floor using the four M8 mounting holes.
With a 155g (175 cm³) shot size and dual 300W heaters (600W total), the Arbour V2 has more than double the capacity of the Injection Mini V2. Dual PID temperature controllers, one for the top of the barrel and one for the bottom, give precise heat control across the full barrel length. Rated output is 1.12 kg/hr, with up to 7 full cycles per hour at maximum shot size.
Designed to work with the full SDS Premium Molds range and compatible with custom aluminium and steel molds via the quick-change mold system.
Key Features
- 155g shot capacity: more than double the Injection Mini V2, suitable for larger products and higher production volumes.
- No compressor needed: manual rack and pinion injection, no air supply required.
- Dual 300W heaters (600W total): faster, more even heating across the full length of the larger barrel.
- 125 bar injection pressure: reliable filling of detailed and deep-cavity molds.
- Dual PID temperature controllers: independent top and bottom control for precise, consistent melt temperatures.
- Quick-change mold system: fast mold changeover without tools.
- Up to 7 cycles per hour: rated output of 1.12 kg/hr at maximum 155g shot size.
- Dual voltage: runs on 110–120V or 220–240V. Your country's plug is included.
- Permanent installation: must be bolted to a bench or floor using M8 bolts through the four mounting holes.
- CE and UKCA certified.
Purchase Options
Kit: all parts, hardware, and a step-by-step digital build guide. Build time is longer than the Injection Mini V2. Good for anyone who wants a thorough understanding of the machine, or for educational and workshop settings.
Partially Assembled: core components assembled before shipping. Some build work is still required on arrival, with full assembly instructions included.
Both options include a country-specific plug and ship globally via UPS Carbon Neutral shipping.
Specifications
- Weight: 38.5 kg
- Dimensions: 160 x 22 x 40 cm (H x D x W)
- Shot Volume: 175 cm³ (approx. 155g PP)
- True Barrel Volume: 224 cm³ (approx. 200g PP)
- Injection Method: Manual rack and pinion
- Injection Pressure: 125 bar
- Heater Power: Dual 300W (600W total)
- Max Temperature: 300°C (dual PID controlled)
- Plastic Melt Time: 8 to 12 minutes
- Rated Output: 1.12 kg/hr
- Full Cycles Per Hour: Max 7 (at 155g shot)
- Max Mould Space: 26 x 18 cm (H x W), unlimited depth
- Mould Connection: Quick-change system
- Voltage: 110–120V 60Hz or 220–240V 50Hz (country-specific plug included)
- Plug Types: UK (G), EU (E), US/CA (B), AU/NZ (I)
- Certification: CE and UKCA certified
- Warranty: 12 months from delivery
- Installation: Must be bolted down (M8 bolts, 4 mounting holes)
What's in the Box
- 1x Arbour Injection Machine V2 (Kit or Partially Assembled)
- 1x Digital Build Guide (Kit) or Assembly Guide (Partially Assembled)
- 1x User and Safety Manual
- 1x Country-specific mains plug
Shipping and Support
We ship from the UK to destinations worldwide via UPS Carbon Neutral shipping. For current dispatch times and shipping rates, see our FAQ page. For any other enquiries, visit our Contact page or use the chat box below.
